The absolute novelty of this mug heat press is six types of thermal cuffs, while the cuff for classic straight cups is so wide that you can hold two cups at once. The support we write about two paragraphs below is therefore composed of two screws and the pressure is also regulated by two screws. All cuffs are of course delivered in "A" class. More about class "A" below. You do not need any tools to replace the inserts with this thermo-press and the attachment of the elements is still stronger. More perfect is also electronics, which after closing the thermolis automatically starts the timekeeping, which is not common in mugs heat presses.

Tuned pressure system:

         If you have already worked with a similar but cheaper mug heat press, you know that as the pressure increases, the pusched side of the element tends to go above or below the fixed side. In the case of this thermo press, this is solved by simply adding an adjustable support to the fixed side of the heating element 

Class A heating elements:

       However, the most significant asset of this heat press is the heating elements used. The material from which they are made is made in the USA. Unlike conventional elements with a bunch of bent wires, these cuffs are made with a preformed matrix of flat steel conductors. This solution ensures not only better heat distribution but also two to three times longer service life.

• Heating element: 6pcs
• Mug Heater: 1.5oz / 2.5oz / 6oz-10oz / 12oz / 17oz /
• 11oz-15oz
• Control unit: GY-04
• Voltage: 120V / 220V
• Power: 130-260W
• Adjustable time: 0-999 sec.
• Maximum temperature: 225 ° C
• Temperature measurement accuracy: ± 0.5%
• Package dimensions: 60,4*42,6*29,7cm
• Packaging weight: 12.75 kg